Removing body from chassis

1.     remove all four wheels

a.     center of wheel has a screw

2.     remove 4 screws from front chassis bracket connecting it to body

3.     remove drivetrain cover (4 screws)

a.     rear suspension lifts up

b.     cylinder supporter piece comes out of drivetrain baracket

c.      rear shocks separate from rear drivetrain and chassis

4.     remove rear 2 screws from the bracket connecting the chassis to the body

5.     unplug electrical cable from chassis to circuit board beneath body that controls car lights

6.     rebuild drive train

a.     place springs in suspension and compress (chassis and rear drivetrain)

b.     place cylinder supporter piece through drivetrain bracket

c.      connect drivetrain to chassis

d.     tighten  drivetrain cover with 4 screws


After looking at the servomotor (last image) it appears to cheaply made and a potential problem as we will have issues later on assigning it specific degrees for steering left or right. i will need to dissemble the entire chassis to get into the servomotor cabling.